Low Flow "Stream" Tap Aerator, choose either: 1.7, 3.5 or 5 litres per minute (fits 24mm Male & 22mm Female spouts) - perfect for shallow hand basins.

Be the first to review this product

£9.30
How do I stop my tap from splashing and making a mess? With this brilliant product!
 
* 24mm Male and 22mm Female Stream Tap Aerator complete in quality chromed brass housing 
* A low but effective water flow rate at only 3.5 litres per minute N.B: 1.7l/min to full flow also available
* Saves water by aerating (adding air) preventing messy splashing and improving the flow!
* Your tap will be like new in just 2 minutes - no need to replace your whole tap!
* Excellent value for money with the added benefit of a quick payback!
* Suitable for hard water areas as the nozzles are easy wipe clean.
* Save water & energy = save money!
Easy to fit - just unscrew your existing regulator (tap end) and screw on this new aerator
Complete 1 piece - no fiddly bits and pieces!

* Required Fields

£9.30

More Views

The Every Drop Is Precious low water flow rate "Stream" Tap Aerator incorporates the latest German eco-technology helping you to save water, energy and therefore money in your home or business. This quality monobloc (single spout) 24 & 22mm hand rinse basin stream tap aerator fits both male and female tap threads, as it comes with a metal adaptor, which you can simply unscrew if you don't need it on your tap.
It's housed in solid chromed brass (so it won't rust) and is easy to fit (see our fitting guide here) - simply unscrew your existing regulator (found at the end of your tap spout) and screw on this new one - it will be like having a brand new tap! Even expensive & brand new taps can come with cheap & nasty tap ends - so don't change your whole tap - just change the end of it! Have a look at our videos, to see just how easy it is to fit! Includes WRAS approved eco components from R.C. Mannesmann GmbH & is also suitable for low water pressures. Stop that splashing or dripping tap today! Perfect for both domestic and commercial applications.
You'll recoup the cost of this brilliant product within a few months of use, as it reduces the water flow to 3.5l (other flow rates available upon checkout) per minute. You'll achieve a straight, non-splash stream of water which is perfect for hand washing.
Simply unscrew your existing regulator which will be found at the end of your tap spout and screw on this new one!  It's as easy as that! See the Every Drop Is Precious Washbasin Pack Fitting Guide to see just how easy it is to fit one!
 
N.B: If you're not sure if your tap end has a regulator then feel free to send us a photo of your current tap end, and we'll do our best to help. 
Also, there are some old fashioned taps that don't have any regulators on at all or some that have been suctioned on using a machine so won't have any screw thread, in which case sadly this product will not be suitable. We do have a solution for threadless or older taps that don't have any regulators, for tap ends that measure between 12mm and 16mm (Male), click here.
 
24MM MALE AND 22MM FEMALE "STREAM" TAP AERATOR
• 3.5 litres per minute water flow rate (when tap is turned on fully - a low BUT effective flow rate!)
• Integrated Aerator (adds air into the water stream), see FAQ’s tab for more info.
• Quality chromed brass tap aerator casing
• Comes with an adaptor to fit BOTH Male 24mm (threading on outside) & Female 22mm (threading on inside) round mixer (monobloc) taps
• Product Length: 1cm (excluding the threading as it won't be seen as it sits inside the taps spout)
• Easy to fit - screw on connection
• Suitable for round, basin, kitchen and utility mixer taps (check the size of your tap end first as other sizes available - to see how, read info below) 
• Standard Pitch of 1mm (spacing on the threading), i.e. M24x1 
 
HOW TO FIT?  Easiest if you just watch this video or look at this Fitting Guide
1. Unscrew your existing regulator which will be found at the end of your tap spout (you may need to use a tea towel and a pair of pliers to loosen, if your tap end is covered in limescale).
2. Measure the diameter of the part you've removed (at the threading end - the part that sits in or on the tap spout, i.e. not the end where the water comes out) and if it measures 24mm as a Male product (threading on the outside) or 22mm as a Female product (threading on the inside), then this is the product for you! Please note other tap aerator sizes are available. 
3. Now screw the new tap aerator into the tap end (with rubber washer). The product will come with a metal adaptor already screwed onto the tap aerator so if you don't need it just unscrew it to take off. It will come with a couple of spare rubber washers too. If you're struggling to achieve a water tight seal, then try wrapping a little PTFE tape around the threading on the tap spout -  it's like thin stretchy plaster and can be picked up for a few pence from a hardware store. 
 
CLEANING
Clean with a damp cloth to remove any scum/lime scale build up. Please do not use abrasive chemicals as they may cause damage.
 
WARRANTY
Parts covered under warranty for 2 years against any manufacturing defects.
 
SAVE WATER, SAVE ENERGY, SAVE MONEY!


You may also be interested in the following product(s)

"Swivel, Stream & Spray" Kitchen Tap Aerator 24mm Male & 22mm Female

"Swivel, Stream & Spray" Kitchen Tap Aerator 24mm Male & 22mm Female

£18.00
     

Write Your Own Review

You're reviewing: Low Flow "Stream" Tap Aerator, choose either: 1.7, 3.5 or 5 litres per minute (fits 24mm Male & 22mm Female spouts) - perfect for shallow hand basins.