Separate Hot And Cold Taps into A Shower Converter Kit (and back again in seconds!)

£69.99
Kit includes:  
x1 SHOWER HEAD of your choice
x1 "Y Shape" SHOWER HOSE (1.5m Satin Smooth, grey/silver)
x2 TAP AERATORS (fits Round, Separate Hot and Cold Taps measuring 24mm Male or 22mm Female) with x2 HOSE CONNECTORS
 
* No nasty rubber push on hoses to fiddle with as the "Quick Fit" Shower Hose Connector allows you to quickly attach a shower hose to your taps with just a gentle push!
* The permanent tap aerators allow you to use your taps like normal with a perfect, non splash straight stream of water;
* When you're ready to shower, the aerators special casing allows you to attach and detach a shower hose quickly and easily.
* The On Off Thumb Lever Shower Head allows you to wash your hair in the bath without turning the taps on and off mid washing, freeing up your hands to shampoo! Simply push the thumb lever for water to flow, and release to stop - you control the flow and it's great for saving water
 
N.B: the on/off Thumb Lever Hair Wash Shower Head is NOT suitable for electric or pumped showers, but you can select another quality shower head below.

* Required Fields

£69.99

The Every Drop Is Precious brilliant all-in-one "Quick Fit Taps to Shower Converter Kit" will allow you to use your seperate hot and cold taps like normal and also quickly attach a shower hose to the taps whenever you need to turn your tap into an instant shower! Perfect for people who don't have showers in their bathroom, require a shower hose in the sink for hair washing or for washing small pets! At the same time, you'll save water and energy and therefore money (especially if you combine the kit with one of our on/off thumb lever shower heads!). This is achieved by the clever tap aerator (the part fitted at the end of the tap where the hose connects to) which reduces the amount of water by adding air into the water stream, which in turn actually improves the water flow! Get rid of your messy splashing taps without buying new ones! Incorporates the latest in German eco-technology and is suitable for seperate hot and cold, round taps which measure 24mm Male or 22mm Female - perfect for your kitchen, utility or bathroom! Includes WRAS approved eco components from R.C. Mannesmann GmbH.


"QUICK FIT" TAP AERATOR AND HOSE CONNECTOR ALL-IN-ONE (x2 in pack)
Use your tap like normal with the option to quickly attach and detach a shower hose!
Easy to fit screw on connections
Suitable for most seperate hot and cold, round, basin/kitchen/utility and bath taps (check the size of your tap end first - to see how, read info below)
Comes with a Metal Male To Female Adaptor/Collar to fit BOTH Male 24mm and Female 22mm round mixer tap threads (other size adaptors also available)
Tap Aerator water flow rate is 6 litres per minute as standard (when tap is turned on fully). If you have poor water pressure then ask us for a "full flow" tap aerator insert instead
Quality Chromed Brass Tap Aerator Casing

"Y" SHAPE SHOWER HOSE
Stylish Silver/Grey Colour
Standard 1/2" Chrome Connections with rubber washers

HOW TO FIT?
Simply unscrew your existing regulator found on the end of your taps spout. You may need to use a tea towel and a pair of pliers to loosen, if your tap end is covered in limescale. If you're not sure if yours can be unscrewed send us a photo and we'll try and help. Most regulators (the part at the end of your tap spout where the water comes out) have two small flat edges where an adjustable spanner can be used to unscrew it. Once unscrewed, measure the diameter of the part you've removed (at the threaded end - the part that sits in or on the tap spout NOT the end where the water comes out) and if it measures either 24mm as a Male product (threading on the outside of the part) or 22mm as a Female product (threading on the inside) then this is the product for you! Please note other adaptors sizes are available, i.e. 28mm Male. If you aren't sure what yours measures as they are a little tricky, please send us a photo with a tape measure over the top of the removed regulator, directly across the middle of it at the threading end. The product comes complete with a metal Male to Female Adaptor, so if you require a Male product simply unscrew the Female Adaptor before fitting. Now, screw the new tap aerator into the tap end, you will probably need to use some rubber washers to ensure a water tight seal. If you still can't get a water tight seal after trying a variety of rubber washers then use a little PTFE tape (costs a couple of pence from your local hardware store) around the threading of the tap aerator to pad it out a bit. When you're ready to use your shower hose in the sink or bath, simply screw the white hose connectors into the shower hose connections and then simply push the shower hose ends into the tap aerators (new tap end) special casing.

Please note there are some old fashioned taps that don't have any regulators on at all or some that have been suctioned on using a machine so won't have any screw thread, in which case sadly this product will not be suitable. We are currently working on a solution for old taps that don't have any regulators, please let us know if you wish to be kept updated.

CLEANING
Clean with a damp cloth to remove any scum/lime scale build up. Please do not use abrasive chemicals as they may cause damage and invalidate your warranty.

WARRANTY
Parts covered under warranty for 2 years against any manufacturing defects.

SAVE WATER, SAVE ENERGY, SAVE MONEY!


SAFETY ADVICE

Products are suitable for use with normal household water temperatures. For safety and convenience do not use with water above 65C or with combined water pressures above 4 bar.
Always take care when using hot water, especially with children. NEVER leave a child unattended in a bathroom.
Always turn on the cold water first and then gradually add the hot until the desired temperature is achieved.
Before fitting please ensure that the tap surfaces have been cleaned to remove any bath oil or soap residue.
Do not connect directly to water heaters or combination boilers.
Do not use the on/off temporary stop shower head with electric or pumped showers.
To ensure constant temperature and flow, avoid running cold water from other outlets during use.

  1. Excellent product Review by M Perry

    Excellent product, very easy to fit and use. Can now use my taps as a 'mini shower' without water splashing all over the place (used with thumb lever shower). Ideal for bathing my two dogs. Would highly recommend. (Posted on 15/06/2015)


Write Your Own Review

You're reviewing: Separate Hot And Cold Taps into A Shower Converter Kit (and back again in seconds!)