Revolutionary "Quick to Fit" Shower Hose or Hosepipe Connector to a Mixer Tap AND A Tap Aerator all-in-one! (24mm Male & 22mm Female) with NEW metal hose connector!

Availability: In stock

£19.99

Quick Overview


  • How do I fit a shower hose or hosepipe to my sink or bath mixer tap? With this terrific product! 

    Click on this video to see how it works!

    Available to buy via Amazon here: https://www.amazon.co.uk/instant-Hosepipe-Permanent-Aerator-aerators/dp/B00DO1GYW0

    x1 "Quick Fit" Tap Aerator AND x1 Hose Connector all-in-one! Turn your round mixer monobloc tap (kitchen/basin/bath) into a great shower with one easy movement! To connect to a hosepipe aswell, just add the hosepipe adaptor to your order too.

    No more nasty rubber push on hoses that come off under pressure & leak!
    * Easy to fit - simply screw the permanent tap aerator into your tap spout & screw the hose connector into your hose!
    * To connect a hose, simply secure it into the tap spout with one gentle push!
    The quality tap aerator allows normal tap functionality but with a perfect water stream!
    * Suitable for BOTH Male 24mm & Female 22mm tap threads (other sizes available too)
    * The aerator adds air into the water stream to save water & energy, which saves you money!

£19.99

Details

The Every Drop Is Precious brilliant all-in-one "Quick Fit" Tap Aerator & Hose Connector will allow you to use your tap like normal and quickly attach a shower hose or hosepipe to the tap whenever you need to turn your tap into an instant shower!  Perfect for people who don't have showers in their bathroom, require a shower hose in the sink for hair washing or small pet washing or for people who need warm water outside!
At the same time, you'll save water & energy and therefore money (especially if it can be used with one of our on/off thumb lever shower heads)! This is achieved by the clever tap aerator which reduces the amount of water you use and adds air into the water stream, which in turn actually improves the water flow! Get rid of your messy splashing tap without buying a whole new tap! Incorporates the latest in German eco-technology and is suitable for a monobloc (single spout), round, mixer tap - perfect for your kitchen, utility or bath room! Includes WRAS approved eco components from R.C. Mannesmann GmbH.
 
"QUICK FIT" TAP AERATOR & HOSE CONNECTOR ALL-IN-ONE 
Use your tap like normal with the option to quickly attach and detach a shower hose or hosepipe!
• Easy to fit screw on connections
• Suitable for most round, basin/kitchen/utility & bath mixer taps (check the size of your tap end first -to see how, read info below)
• Comes with a Metal Male To Female Adaptor to fit BOTH Male 24mm & Female 22mm round mixer tap threads (other size adaptors available)
• Pitch 1mm (spacing on the thread), i.e. M24x1
• Product Length: 2.5cm (including Female Adaptor but without hose connector attached)
• Tap Aerator water flow rate is 13.5-15 litres per minute (when tap is turned on fully) - other flow rates available please ask.
• Quality Chromed Brass Tap Aerator Casing
 
HOW TO FIT? (Easiest if you just watch our video - click here)
1. Simply unscrew your existing regulator found on the end of your tap spout, you may need to use a tea towel and a pair of pliers to loosen, if your tap end is covered in limescale. If you're not sure if yours can be unscrewed send us a photo and we'll try and help. Now measure the diameter of the part you've removed (at the threaded end - the part that sits in or on the tap spout) and if it measures either 24mm as a Male product (threading on outside) or 22mm as a Female product (threading on the inside) then this is the product for you! Please note other adaptors sizes are available, i.e. 28mm Male. The product comes complete with a metal Male to Female Adaptor, so if you require a Male product simply unscrew the Female adaptor before fitting. Now, screw the new tap aerator into the tap end - you will probably need to some rubber washers to ensure a water tight seal. If you're still struggling to achieve a water tight seal, then try using a little PTFE tape wrapped around the threading on the tap aerator -  it's like thin stretchy plaster and can be picked up for a few pence from a hardware store.

2. Then when you want to use your shower hose in the sink or bath, simply screw the white hose connector into one end of your shower hose, and then push the shower hose into the tap aerator (new tap end) with special casing.

3. To fit a hosepipe onto the tap, simply screw the white hose connector into a Hozelock Adaptor and then slide the hosepipe onto the tap - see photo illustration above (remember to add the hosepipe adaptor to your basket for this option).
 
Please note there are some old fashioned taps that don't have any regulators on at all or some that have been suctioned on using a machine so won't have any screw thread, in which case sadly this product will not be suitable. We are currently working on a solution for old taps that don't have any regulators, for tap ends that measure between 14mm and 18mm - if you're interested please let us know.

CLEANING
Clean with a damp cloth to remove any scum/lime scale build up. Please do not use abrasive chemicals as they may cause damage.
 
WARRANTY
Parts covered under warranty for 2 years against any manufacturing defects.
 
SAVE WATER, SAVE ENERGY, SAVE MONEY!
 
SAFETY ADVICE
  1. Products are suitable for use with normal household water temperatures. For safety and convenience do not use with water above 65C or with combined water pressures above 4 bar.
  2. Always take care when using hot water, especially with children. NEVER leave a child unattended in a bathroom.
  3. Always turn on the cold water first and then gradually add the hot until the desired temperature is achieved.
  4. Before fitting please ensure that the tap surfaces have been cleaned to remove any bath oil or soap residue.
  5. Do not connect directly to water heaters or combination boilers.
  6. Do not use the on/off temporary stop shower head with electric or pumped showers.
  7. To ensure constant temperature and flow, avoid running cold water from other outlets during use.
[profiler]
Memory usage: real: 23068672, emalloc: 20449664
Code ProfilerTimeCntEmallocRealMem