Pet Wash Shower Head - perfect for BOTH cats & dogs!

Availability: In stock


Quick Overview

This brilliant on/off lever shower head will enable you to wash your pet indoors on: a shower or bath shower mixer (N.B: NOT suitable for electric or pumped showers)

PET WASH SHOWER HEAD (with on/off thumb lever)
* Easy, less mess & stress pet washing
* Simply squeeze the lever to release water and let go to stop - you control the flow!
* No need to turn water on & off during washing
* Suitable for bath shower mixers & showers (N.B: NOT suitable for electric or pumped showers)
* Also suitable for: kitchen / utility / basin / bath mixer taps or hosepipes if you add the correct attachments - see here NEW "Quick Fit" Shower To Sink or Bath Mixer Tap Connector
* Spend less by purchasing the complete "Indoor Pet Wash Pack" OR "Outdoor Pet Wash Shower Pack" OR Indoor & Outdoor Pet Wash Pack
N.B: We only recommend you use this product with a quality Every Drop Is Precious shower hose




Our Pet Shower Head is a must for all pet lovers!
This simple thumb lever controlled, on/off water flow means that you don't have to fiddle about turning the taps on and off and you won't need to adjust the temperature after it's first set, whilst washing your pet. This wonderful shower head fits all standard EU/UK shower hoses and takes only a moment to fit. Once fitted it looks so stylish you may decide to use it as your permanent bath shower mixer fitting, as it's perfect for hair washing too! Incredibly easy to fit, simply unscrew your existing shower head and screw on this new one! You can now also buy adaptors so that you can wash your pet in the garden with warm water, or if you have a toy breed or cat then you may prefer to wash in a kitchen or utility sink. If you only have a bath mixer tap then you can attach the "Quick Fit" shower hose to tap connector to enable you to use a shower hose on your bath mixer tap! (Fits 24 & 22mm - 28mm version available mid Dec). Our Pet Wash Shower Packs will provide you with the very best solution for washing your pet and are better value for you.

The Pet Wash Shower Head can be used on:
~ a shower 
~ a bath/shower mixer
(NOT to be used with electric / pumped showers - see info below)
• Smooth, easy clean, stylish chrome effect
• 1/2 " standard UK/EU connection, see photo for dimensions
• Pre-fitted backflow prevention device (See FAQ’s tab for more information)

Clean with a damp cloth to remove any scum/lime scale build up. Please do not use abrasive chemicals as they may cause damage.
Parts covered under warranty for 2 years against any manufacturing defects.
Recommended for use with a EU certified shower hose only (EN1113).
The Pet Wash Shower Head is NOT suitable for use with electric or pumped showers.
We recommend that when this product is used indoors you use a quality Every Drop Is Precious shower hose (ie compliant with EN1113).
WARNING: It is important to always turn off the water after use, to avoid bursting your hose. The pet wash shower head cannot be used as a permanent water stop, and has only been designed to give a temporary shut off.
On 1st Use ONLY turn the tap / shower on slightly to determine water flow.
Only suitable for use with normal household water temperatures, do not use with water above 65C or with combined water pressures above 4 bar.
The Pet Wash Shower Head is not a thermostatic controller, it will only provide a temporary shut-off solution and cannot control water temperature fluctuations caused by your water heating system.
The Pet Wash Shower Head should not be left attached to a hosepipe permanently, as it can be adversely affected by extreme changes of temperature. You may also only need to turn your outside tap on 1/4 of the way, as overly powerful pressure may cause the product to 'back spray', and may cause damage.

Safety Advice for those with high water pressure in their homes, this advice applies to all those wanting to use our shower hoses and shower heads which have water saving regulators fitted as well as lever operated items.

~ Products are suitable for use with normal household water temperatures. For safety and convenience do not use with water above 65C or with combined water pressures above 4 bar.
~ Always take care when using hot water, especially with children. NEVER leave a child unattended in a bathroom.
~ Always turn on the cold water first and then gradually add the hot until the desired temperature is achieved.
~ Before fitting please ensure that the tap surfaces have been cleaned to remove any bath oil or soap residue.
~ Do not connect directly to water heaters or combination boilers.
~ Do not use with electric or pumped showers
~ To ensure constant temperature and flow, avoid running cold water from other outlets during use.

Useful information: If your cold supply to the tap is mains fed and the hot is supplied from a hot water cylinder, when the shower head flow is stopped (when you let go of the lever), you could experience the cold water flowing back into the hot cylinder. Do not panic - this problem can be avoided by fitting a non return valve (or check valve) into the hot water delivery pipe.  (In more modern homes they may already be fitted.)  This is easily achieved by a competent DIY person or plumber and should take no more than 15-20 mins. Please do remember that your pet wash shower head is not a thermostatic product, we recommend you turn on cold tap first and then gently add hot water to desired temperature. Happy pet washing!


Memory usage: real: 20971520, emalloc: 20104320
Code ProfilerTimeCntEmallocRealMem