Home ยป Hosepipe WARM water pet dog wash pack, indoor tap connection

Hosepipe WARM water pet dog wash pack, indoor tap connection

Hosepipe WARM water pet dog wash pack, indoor tap connection

Description

Pack includes:

  • x2 Metal Hozelock Adaptors (1 for the Dog Wash Shower Head & 1 for the tap connection)
  • x1 Pet Dog Wash Shower Head with thumb lever water control
  • x1 “Quick Fit” Tap Aerator (fits 28mm Male, 24mm Male and 22mm Female taps) and Hose Connector
  • No need to keep turning your water on & off mid shampoo – allows you to stay focused on your pet
  • The Quick Fit tap aerator is your permanent mixer tap aerator which creates a perfect non splash water stream; and also allows you to slide a hosepipe (or shower hose) on the tap spout whenever you need to turn your tap into a hosepipe or shower
  • Tap Aerator can be fitted on various taps: kitchen, bath, bath/shower mixer, utility or basin/sink tap
  • N.B: the shower head is NOT suitable for electric or pumped showers
  • A kitchen / basin / utility / bath mixer tap from a shower hose connection or a hosepipe for WARM water washing! Your pet will appreciate it! You could even fill up a paddling pool with water for your pet to cool off in the summer months!

Additional Information

After fitting the tap aerator to your tap (simply screws on), you screw the Pet Wash Shower Head to your current hosepipe via a Hozelock adaptor, then you screw the Hose Connector (this part comes pre-fitted to the tap aerator) into the other Hozelock adaptor which you attach to your hosepipe.

Then you simply slide the hosepipe end into the tap aerator casing and you’re ready to wash your pet via a hosepipe from a warm water indoor mixer tap! After turning the water on, simply squeeze the lever on the Pet Wash Shower Head to release water and release lever to stop – you control the flow and it’s great for saving water!

POINTS TO NOTE

Not suitable for electric/pumped showers.

Please contact us if you have a pump that works with a pressure sensor as you may be able to use this product.

On 1st use ONLY turn the water on slightly to determine water flow. It is important to always turn off the water after use, to avoid bursting your shower hose.

We recommend that when this product is used you only use a quality Every Drop Is Precious shower hose (compliant with EN1113) which has been tested for use with this shower head.

The shower head cannot be used as a permanent water stop and has only been designed to give a temporary shut off.

Only suitable for use with normal household water temperatures, do not use with water above 65C or with combined water pressures above 4 bar. The shower head is not a thermostatic controller, it will only provide a temporary shut-off solution and cannot control water temperature fluctuations caused by your water heating system.

You may also only need to turn your outside tap on 1/4 of the way, as overly powerful pressure may cause the product to ‘back spray’, and may cause damage.

USEFUL INFORMATION:

If your cold supply to the tap is mains fed and the hot is supplied from a hot water cylinder, when the shower head flow is stopped (when you let go of lever), you could experience the cold water flowing back into the hot cylinder. Do not panic this problem can be avoided by fitting a non return valve (or check valve) into the hot water delivery pipe. (In more modern homes they may already be fitted.)

This is easily achieved by a competent DIY person or plumber and should take no more than 15-20 mins.

The Pet Wash Shower Head is not a thermostatic controller, it will only provide a temporary shut-off solution and cannot control water temperature fluctuations caused by your water heating system.

Check the water temperature EACH TIME after depressing the thumb lever, in case there are any fluctuations in temperature.

  • Always take care when using hot water, especially with your pet.
  • Always turn on the cold water first and then gradually add the hot until the desired temperature is achieved.
  • Ensure you check the temperature of the water each time you depress the thumb lever.
  • Before fitting please ensure that the tap surfaces have been cleaned to remove any bath oil or soap residue
  • Do not connect directly to water heaters or combination boilers.
  • Do not use with electric or pumped showers.
  • To ensure constant temperature and flow, avoid running cold water from other outlets during use.

3 reviews for Hosepipe WARM water pet dog wash pack, indoor tap connection

  1. Mrs S Kempton

    I was surprised how small the shower head but it is very generous with water and efficient. I have large dogs and this works very well it’s great to wash them with warm water outside.

  2. LP

    Does what it says on the tin ๐Ÿ™‚ Perfect for washing down my Yorkie in all weathers, great product. Handy that you can adjust the force at which the water comes out. These should be for sale in all good pet shops!!

  3. Actuary By Day

    This brilliant Dog Shower has been such a relief for my 2 dogs in this weather. I’ve even used it to water my hanging baskets, but primarily it’s for the dogs! Great way to keep the dogs cool in this hot weather, but great to know I can attach it to the kitchen tap for warm water rinsing when the weather changes – which will probably be next week knowing the British climate! Cheers.

Add a review

Your email address will not be published. Required fields are marked *

£45.00