Home » Shower head with thumb lever control, solid chromed brass

Shower head with thumb lever control, solid chromed brass

Shower head with thumb lever control, solid chromed brass

Description

  • Heavy duty, easy to fit – standard 1/2″ EU screw thread.
  • Integrated check valve to prevent back flow.
  • Water comes on only when the thumb lever is depressed which gives a huge water saving – perfect for hair salons.
  • No need to turn the water on and off mid shampoo.
  • Slimline design, perfect for getting closer to the hairline and great for rinsing perms, colour and shampoo.
  • N.B: NOT suitable for use with electric or pumped showers.

Please contact us if you have a pump that works with a pressure sensor as you may be able to use this product.

Additional Information

POINTS TO NOTE

Not suitable for electric/pumped showers.

On 1st Use ONLY turn the water on slightly to determine water flow.

It is important to always turn off the water after use, to avoid bursting your shower hose.

We recommend that when this product is used you only use a quality Every Drop Is Precious shower hose (compliant with EN1113) which has been tested for use with this shower head.

The shower head cannot be used as a permanent water stop and has only been designed to give a temporary shut off.

Only suitable for use with normal household water temperatures, do not use with water above 65C or with combined water pressures above 4 bar.

The shower head is not a thermostatic controller, it will only provide a temporary shut-off solution and cannot control water temperature fluctuations caused by your water heating system.

You may also only need to turn your outside tap on 1/4 of the way, as overly powerful pressure may cause the product to ‘back spray’, and may cause damage.

USEFUL INFORMATION:

If your cold supply to the tap is mains fed and the hot is supplied from a hot water cylinder, when the shower head flow is stopped (when you let go of lever), you could experience the cold water flowing back into the hot cylinder.

Do not panic this problem can be avoided by fitting a non return valve (or check valve) into the hot water delivery pipe. (In more modern homes they may already be fitted.) This is easily achieved by a competent DIY person or plumber and should take no more than 15-20 mins.

The Hair Wash Shower Head is not a thermostatic controller, it will only provide a temporary shut-off solution and cannot control water temperature fluctuations caused by your water heating system.

  • Always take care when using hot water, especially with children. NEVER leave a child unattended in a bathroom.
  • Always turn on the cold water first and then gradually add the hot until the desired temperature is achieved.
  • Before fitting please ensure that the tap surfaces have been cleaned to remove any bath oil or soap residue.
  • Do not connect directly to water heaters or combination boilers.
  • Do not use with electric or pumped showers.
  • To ensure constant temperature and flow, avoid running cold water from other outlets during use.

3 reviews for Shower head with thumb lever control, solid chromed brass

  1. Mrs R. Pasha

    Prompt & hassle-free

  2. Sailorman

    An excellent piece of equipment. Strong, heavy and beautifully chromed. Well worth the money.

  3. D Scott

    The quality of the product and ease of use is excellent, and arrived in good time.

Add a review

Your email address will not be published. Required fields are marked *

£50.00