Home » Tap to Shower Pack, includes “quick fit” tap aerator and hose connector, x1 shower head and x1 shower hose

Tap to Shower Pack, includes “quick fit” tap aerator and hose connector, x1 shower head and x1 shower hose

Tap to Shower Pack, includes “quick fit” tap aerator and hose connector, x1 shower head and x1 shower hose


Turn your single mixer tap into an instant shower and back again in seconds! No more nasty rubber push on hoses to fiddle with as the “Quick Fit” Tap Aerator and Hose Connector allows you to quickly and securely attach a shower hose to your sink tap or bath mixer tap with just a gentle push!

The “Quick Fit” tap device also doubles up as your permanent tap aerator and your tap will function normally when not being used as a shower. A perfect solution if you need to quickly turn your bath, basin or kitchen sink tap into an instant shower – perfect for tenants, if your electric shower is broken or if you simply want to turn your tap into a shower.


x1 Shower Head, x1 Shower Hose and x1 Quick Fit Tap Aerator and Hose Connector (fits 28mm Male, 24mm Male or 22mm Female tap spouts)

Click on “Additional Information” tab for information on the shower heads and hoses included in this pack

Additional Information


Hair Wash Shower Head with thumb lever control, chromed plastic or solid brass*

  • Integrated check valve to prevent back flow (prevents contamination of your water system – i.e: if shower head is dropped in bath water)
  • Easy clean, stylish chrome finish
  • 1/2 ” standard UK/EU screw on connection
  • Light weight chromed plastic avoids damage to ceramic basins if dropped (*solid brass version available more suited for commercial use)
  • Water comes on only when the thumb lever is depressed which gives a huge water saving – perfect for hair salons too
  • No need to turn the water on and off mid shampoo / rinse
  • Slimline design, perfect for getting closer to the hairline and great for rinsing perms, colour and shampoo
  • NOT suitable for use with electric or pumped showers

3 Spray Pattern (10cm diameter) / Large 3 Spray Pattern (14cm diameter) / 3 Spray Pattern Oval Twist / 5 Spray Pattern / Design Air or Rectangle Shower Head

  • All of the above shower heads simply screw onto a standard 1/2″ BSP shower hose
  • All our shower heads include a pre-fitted integrated back flow prevention device also known as a check valve. If you drop your shower head into bath water it won’t be sucked back up into your water system. – N.B: these do not affect the water flow rate, they simply prevent any dirty water contamination
  • Easy to wipe clean rubber nozzles – combatting limescale (the rectangle shower head does not include these)
  • Suitable for use with electric, pumped and gravity fed showers
  • The oval shower head has 3 spray patterns, simply twist the head to change


  • Choice of Quality Metal or Smooth Easy Clean
  • Lengths available: 1.5m, 1.75m or 2m (or for an even longer shower hose, add the “shower hose to shower hose connector” to join 2 hoses together); if you require a shorter hose please contact us directly
  • Chromed brass connections with rubber washers at each end to ensure a water tight seal
  • German manufactured superior quality
  • Standard 1/2″ BSP EU/UK screw on connections
  • Metal hoses are very strong and flexible and don’t pinch or kink – perfect for basin and shower use
  • Smooth hoses are easy to wipe clean, look stylish – perfect for stand up showers

“Quick Fit” Tap Aerator (fits on the tap end) and Hose Connector (fits on the shower hose)

  • This product is the best way to turn your tap into an instant shower, and back again in seconds – no leaks!*
  • Fits 28mm Male, 24mm Male and 22mm Female taps (other adaptor sizes available under “Accessories”)
  • Fits on a round kitchen, basin, utility or bath mixer tap (for separate hot and cold taps, you’ll need the Y shape shower hose and x2 quick fits)
  • The tap aerator creates a permanent aerated (aerated means air added into the water stream which saves you water and therefore money) straight, non-splash, non-drip water stream and creates a champagne effect water stream
  • Hose connector (this part comes pre-fitted to the tap aerator) fits all standard 1/2″ BSP EU / UK shower hoses
  • Thread pitch – standard 1mm (spacing between threads), i.e. M24x1
  • Product Length: 2.5cm (including Female Adaptor but without hose connector attached)
  • Tap Aerator water flow rate is 13.5-15 litres per minute (when tap is turned on fully) – other flow rates available please ask.
  • Quality chromed brass tap aerator casing and solid chromed brass hose connector
  • The hose connector comes pre-fitted to the tap aerator and the 28mm Male and 22mm Female adaptors come in the pack – the tap aerator without any adaptors measures 24mm Male
  • * If your tap leaks, then you may need to use a variation of rubber washers or a little PTFE tape wrapped around the threading before screwing into the tap spout.


Simple to fit and easy to use – easy screw on connection to your tap and shower hose. Unscrew your existing tap aerator and screw into the tap spout the new tap aerator. Screw the hose connector (pre-fitted to the tap aerator) into the shower hose, now you can slide the shower hose on and off the tap as required. Make sure you measure your existing tap aerator once unscrewed – see photo. It’s important to be accurate – feel free to email us a photo like our photo example if you’d like some help.


Clean with a damp cloth to remove any scum/lime scale build up. Please do not use abrasive chemicals as they may cause damage.


Parts covered under warranty for 2 years against any manufacturing defects.


There are no reviews yet.

Be the first to review “Tap to Shower Pack, includes “quick fit” tap aerator and hose connector, x1 shower head and x1 shower hose”

Your email address will not be published. Required fields are marked *